MikroTik RBGroove52HPn
68.90€
MikroTik RBGroove52HPn, 27dBm, 600MHz, 64MB, 2GHz/5GHz, 1xEthernet, L3
Διαθέσιμο κατόπιν παραγγελίας
Εγγύηση:
- 1 έτος
Groove 52HPn
Our smallest outdoor series model – a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power!
With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.
Box contains: Groove unit, mounting loops, PoE injector and power adapter
Product specifications
| Details | |
| Product code | RBGroove52HPn |
| CPU nominal frequency | 600 MHz |
| CPU core count | 1 |
| Size of RAM | 64 MB |
| 10/100 Ethernet ports | 1 |
| Wireless chip model | AR9342 |
| Wireless standards | 802.11a/b/g/n |
| Supported input voltage | 7 V – 30 V |
| PoE in | Yes |
| Voltage Monitor | Yes |
| PCB temperature monitor | Yes |
| Dimensions | 177x44x44mm, 193g |
| Operating System | RouterOS |
| Operating temperature range | -30C to +70C |
| License level | 3 |
| CPU | AR9342 |
| Max Power consumption | 7W |
| Number of chains | 1 |
| Storage type | NAND |
| Storage size | 64 MB |
| Suggested price | $59.00 |
Included parts
Performance test results
| RBGroove52HPn | AR9342 100M 1 port test | ||||||
| Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
| kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
| Bridging | none (fast path) | 8.1 | 98.4 | 23.5 | 96.3 | 148.0 | 75.8 |
| Bridging | 25 bridge filter rules | 8.1 | 98.4 | 23.5 | 96.3 | 87.6 | 44.9 |
| Routing | none (fast path) | 8.1 | 98.4 | 23.5 | 96.3 | 148.0 | 75.8 |
| Routing | 25 simple queues | 8.1 | 98.4 | 23.5 | 96.3 | 106.6 | 54.6 |
| Routing | 25 ip filter rules | 8.1 | 98.4 | 23.5 | 96.3 | 60.5 | 31.0 |
1.All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2.Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3.Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
4.Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
| Βάρος | 1 κ. |
|---|---|
| Συνδεσιμότητα |
Wireless |
| brands |
